The servo control computer system tensile testing machine is controlled by computer, in line with GB/T16491-2008, GB/T228-2002, HG2369-92, and other manufacturing standards; The machine is widely used in adhesive tape, polymer material, tape, rubber, resin, plastic, metal bar, metal pipe, metal sheet and metal profile and composite materials at room temperature and high low temperature environmental mechanical properties test, with special fixture is also suitable for all kinds of finished products tensile, compression, stripping, shearing, tearing, bending (folding), metal welding strength, riveting strength test. Can print a number of data, according to different data to make graphic output comparison, high control precision, easy to operate; Modular design, a variety of accessories variety, flexible collocation. This machine is mainly suitable for metal tensile, compression, bending and other mechanical properties of the test, but also can achieve constant stress, constant strain, creep, relaxation, axial, radial and other multi-closed-loop test. According to GB, JIS, ASTM, DIN and other standards, tensile strength, yield strength, elongation, constant elongation stress (any percentage), constant stress elongation (any percentage), elastic modulus, elongation at break, peel strength (including 90, 180 degrees peel), bending elastic modulus, tearing strength, bonding strength, shear strength and other parameters.
Basic configuration:
Composition: The combination of computer servo tension machine and high and low temperature box.
Maximum test force |
5KN One range is standard and up to three ranges can be selected |
|
Precision class |
≥1KN 0.25% 0.25 grade ≤1KN 0.1% 0.1 grade |
|
Load para meter |
Test force measurement range |
0.2% ~ 100%FS (full scale) |
|
Test force indication error |
Within ±0.25% of the indicated value/within ±0.1% of the indicated value |
|
Test force resolution |
The maximum test force is /500000, the whole process is not divided into files, and the whole resolution is unchanged |
Displacement parameter |
Displacement indication error |
Within ±0.2% of the indicated value |
|
Displacement resolution |
0.015μm |
Control System parameter |
Force control speed adjustment range |
0.005~5%FS/S |
|
Relative error of force control speed |
Within ±1% of the set value |
|
Displacement control rate range |
0.001~500mm/min |
|
Deformation rate adjustment range |
0.02~5%FS/S |
|
Deformation control rate relative error |
Speed < At 0.05%FS, it is within the set value of ±2%; When the rate is ≥0.05%FS, it is within the set value of ±0.5%; |
|
Relative error of beam speed |
Speed < When 0.01mm/min, the set value is within ±1.0%; When the speed is ≥0.01mm/min, the set value is within ±0.2%; |
|
Constant stress, constant strain, constant displacement control range |
0.5%~100%FS |
|
Constant stress, constant strain, constant displacement control precision |
When the set value is ≥10%FS, it is within ±0.1% of the set value, and when the set value is < 10%FS, it is within ±1% of the set value |
Machine-host parameter |
Overall dimensions (length, width and height) |
W900*D700*H2000mm |
|
Test space (top, bottom clip Center distance with joint pin) |
1200mm |
|
Effective test width |
550mm (or agreed) |
|
Power source |
220V 50Hz,±10% |
|
power |
1KW |
|
Main engine weight |
Approximate 225KG |
temperature chamber parameters |
Box size |
300×300×600 mm (W*D*H) |
|
Content volume |
54L |
|
Temperature range |
-40℃ ~ +100 ℃ (compressor refrigeration) |
|
Heating rate |
About 2℃/ min; unloaded |
|
Cooling rate |
About 1℃/ min; unloaded |
|
Temperature uniformity |
±2.0℃ |
|
Temperature stability |
±0.2℃ |
|
Inner box material |
All round welding of Heat and cold resistant stainless steel (SUS # 304) |
|
Outer box material |
The outer box is made of galvanized plate high powder baking paint or heat and cold resistant stainless steel plate (SUS # 304). |
|
Carton size |
510×1200×840 mm (W*D*H) |
|
Power source |
AC220V |
|
power |
2.5KW |
Machine parameters |
Overall dimensions (length, width and height) |
900×2200×2000mm |
|
Travel space |
Environment box 600mm (without fixture) Room temperature 1200mm(without fixture) |
|
Power source |
220V 50Hz,±10% |
|
power |
3.5KW |
|
Main engine weight |
About 455KG |